Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
CONTROLS & CONNECTIO NS
reduction occurs gradually after the signal has exceeded the Threshold, producing a more musical response (to some folks).
2.4 EQUALIZER
The EQ is divided into three sections or bands (Low, Mid and High) Each band has the following controls: GAIN: Controls the amount of cut or boost of the corresponding frequency. Each gain control offers +/-10dB of attenuation. FREQUENCY: Selects the center frequency of equalization. If the gain is set to 0, this control will have no effect. Q (Bandwidth): Controls the width of the frequency being adjusted. Q is defined as the ratio of the center frequency divided by bandwidth. If the gain is set to 0, this control will have no effect. The Q on the Eureka ranges from 0.4 (wide) to 2.0 (narrow). In octaves the Q on the Eureka ranges from 3 octaves to 2/3 octaves. BYPASS: When pushed in, the EQ is no longer equalizing the signal.
